From Glock:
Details
The GLOCK Performance Trigger meets the criteria for those looking for an enhanced trigger pull and ergonomics, all while utilizing a flat-faced trigger and maintaining the same safety features of the GLOCK Safe Action System.
The GLOCK Performance Trigger is compatible with 9mm Gen4 pistols. A Gen5 slide cover plate ships with all GLOCK Performance Triggers as an included replacement for Gen4 models, ensuring compatibility and proper function. It doesn't come installed on any factory models — it's an accessory only, and must be installed by a certified GLOCK Armorer. GLOCK does not recommend any aftermarket modifications to the trigger itself.
Trigger pull weight: ~5 lbs.
Fits: Gen4 and Gen5 models G26, G19, G17, G34, and models G19X, G45, G47.
Here's the housing and connector straight out of the box.
After a little work, this is the polish we got on the trigger bar.
Pay special attention to the surface that rubs the connector.
Extra attention should also go to the surface touching the safety plunger. Remember — you're polishing, so be careful not to remove too much material.
The factory trigger shoe comes apart the same way as all Glock trigger shoes.
We modify the safety the same way we do on our other Glock triggers.
Then put it all back together, install it, and go shoot!
0 comments